Ebara 2GPE Matrix E-SPD+
Cold Water Booster Set
Ebara 2GPE Matrix E-SPD+
Cold Water Booster Set
The Ebara 2GPE Matrix E-SPD+ range is an ideal solution for boosting water supply on large domestic and commercial applications, covering flows from 0.5 litres / sec up to 15.0 litres /sec with pressures up to 9.0 bar and is available for either a 1ph or 3ph power supply.
The Ebara 2GPE Matrix E-SPD+ range of twin pump variable speed booster sets can operate either as a Duty / Assist set with each pump sized to cover at least 50% of the total demand or as a Duty / Stand-by set with each pump rated for 100% of the total flow rate.
The booster sets are fitted with the Ebara Matrix range of WRAS Approved stainless steel horizontal centrifugal multi-stage pumps controlled via the extremely reliable Ebara E-SPD+ variable speed controller.
The fully packaged WRAS Approved booster sets are supplied fully assembled, tested and preprogrammed offering a plug and play solution.
The Ebara E-SPD+ motor mounted variable speed drive controls the operation of the pump via a pressure transducer wired to each drive, eliminating the possibility of the risk caused by any signal point of failure. The Ebara E-SPD+ drive has 2 RS485 ports for communication and operation of up to 8 pumps. The innovative LCD display gives an easy overview of the system status and of the operating parameters and for keeping track of the history of the key parameters, faults and alarms.
Safety Functions:
- Connections for float switch or flow switch
- 2 pairs of programmable volt free contact outputs
- System protections against excess current, input voltage fluctuations and dry Running.
EBARA 2GPE Matrix E-SPD+
Technical Specifications
Voltage Supply:
Protection:
Motor Size:
Maximum Flow:
Maximum Pressure:
Warranty:
230V~1ph~50hz or 400v~3ph~50z + 10%
IP55
0.45 kW > 4.0 kW
7.5 litres/sec (per pump)
Up to 9.0 Bar
2 years