Ebara 2GPE EVMS E-SPD+

Twin Pump Variable Speed Set

Ebara 2GPE EVMS E-SPD+

Twin Pump Variable Speed Set

The Ebara 2GPE EVMS E-SPD+ range of twin pump variable speed booster sets ​are ideal for higher pressure applications such as for Multi Story apartment blocks​ can operate either as a Duty / Assist set with each pump sized to cover at ​least 50% of the total demand or as a Duty / Stand-by set with each pump rated ​for 100% of the total flow rate.

The booster sets are fitted with the Ebara EVMS range of WRAS Approved stainless steel centrifugal vertical multi-stage pumps controlled via the extremely reliable Ebara E-SPD+ variable speed controller.Suitable for larger commercial applications, the range cover flows from 0.5 litres / sec up to 33.0 litres /sec with pressures up to 15.0 bar.

The fully packaged WRAS Approved booster sets are supplied fully assembled, ​tested and preprogrammed offering a plug and play solution.     ​

​The Ebara E-SPD+ motor mounted variable speed drive controls the operation of ​the pump via a pressure transducer wired to each drive, eliminating the possibility ​of the risk caused by any signal point of failure. The E-SPD+ is equipped with a ​control pad and display for simple system programming and parameter monitoring. ​

The LCD display gives an easy overview of the system ​status and of the operating parameters with icons ​showing the current status and alerts to any system​ errors in addition to the display giving instant ​feedback on the pump’s operation.​

Safety Functions:

  • Connections for float switch or flow switch​
  • 2 pairs of programmable volt free contact outputs​
  • System protections against excess current, input voltage fluctuations and dry ​Running. 
EBARA 2GPE EVMS E-SPD+

Technical Specifications

Voltage Supply:

Protection:

Motor Size:

Maximum Flow:

Maximum Pressure:

Warranty:

230V~1ph~50hz or 400v~3ph~50z + 10%

IP55

0.37 kW > 11.0 kW

16.5 litres/sec (per pump)

Up to 15.0 Bar

2 years